| GEOLOGY AND MINING ENGINEERING |
| CHEMICAL COMPOSITION OF CHROMSPINELL IN CHROMIUM ORE FROM XINJIANG |
Chen Jigao, He Xianchi, Ma Xiufen ,Chen Zhangrui |
1 |
| EFFECT FACTORS AND INCREASING LAW OF PLASTIC STRENGTH (PS) OF CLAY HARDENING GROUTS |
Wang Xinghua |
5 |
| THEORETICAL AND EXPERIMENTAL STUDIES FOR KAISER EFFECT IN ROCK |
Chen Zhonghui, Tang Chun'an, Xu Xiaohe ,Li Chunlin |
9 |
| BERGER MODEL OF FLABBY ROCK AND RHEOLOGIC PRESSURE ACTED ON SHAFT |
Zhang Xiangdong ,Zhen Yutian, Lu Xingya, Zhang Yufan |
13 |
| MATHEMATICAL MODEL FOR OPTIMIZING ORE DRAWING SCHEDULING OF SPONTANEOUS CAVING METHOD |
Wang Xinhua, Pan Changliang |
18 |
| DEFINITION AND CONTENTS OF SPATIAL ANLYSIS |
Xiang Nanping, Han Xianjue |
25 |
| ACCURACY ANALYSIS OF MEASURING CONSTRUCTION GAUGE OF TUNNEL |
Ma Li |
28 |
| MINERAL PROCESSING, METALLURGY AN |
| THE PROCESS OF SULFIDE PRECIPITATION OF ARSENIC IN SULFURIC ACID SOLUTION AND EFFECT OF MAGNETIC FIELD |
Ma Wei, Ma Rongjun ,Li Yang, Cao Wentao, Sen Dianbang |
33 |
| DIRECT PRODUCTION OF COPPER ARSENATE FROM BEARING ARSENIC DUSTS |
Li Peng, Tang Motang, Lu Junle |
37 |
| TREATMENT AND UTILIZATION OF RED MUD DERIVED FROM BAYER PROCESS |
Liu Zigao, Yang Changshi, Cheng Zonghao ,Ai Menging |
40 |
| ANODIC PASSIVATING FILM OF COPPER IN CONCENTRATED NaOH SOLUTION |
He Jianbo, Li Xueliang, Lin Jianxin |
45 |
| ELECTRONIC SPECTRA OF TETRAKIS- [μ-ACETYLSALICYLATO-O1O2] DICOPPER(Ⅱ) COMPLEX |
Liu Weiping, Xiong Huizhou, Yang Yikun, Chen Xizhu ,Chen Zhihe, Shen Zhiqiang, Li Ling |
49 |
| SIMULTANEOUS SPECTROPHOTOMETRY DETERMINATION OF TITANIUM, TIN, MOLYBDENUM, TUNGSTEN BY KALMAN FILTER |
Chen Tongsen, Chen Zhan'guang, He Bo, Li Zhiliang |
52 |
| MATERIALS SCIENCE AND ENGINEERING |
| SPECIAL MECHANISMS OF STRENGTHENING AND TOUGHENING FOR ALUMINIUM-LITHIUM ALLOY |
Chen Zheng, Wang Yongxin, Xu Lei |
56 |
| SHAPE MEMORY EFFECT OF A TUNGSTEN TAILINGS GLASS-CERAMICS |
Sun Xiaohua, Wang Mingpu, Cao Xianliang, Li Shutang |
62 |
| NEW TECHNOLOGY OF DIE FORGING PROCESS OF ALUMINIUM ALLOY HUB |
Zeng Sumin |
65 |
| WELDABILITY OF ALUMINIUM ALLOYS AND PROPERTIES OF WELD JOINTS |
Wang Yuanliang, Qu Jinshan, Yan Chuanpeng, Hu Jiufu |
69 |
| INFLUENCE OF MICROSTRUCTURE OF TiAl BASED ALLOY ON THE MECHANICAL PROPERTIES AT ELEVATED TEMPERATURE |
He Yuehui, Huang Baiyun, Zhou Kecao, Ou Weipei, Cheng Xiaoqun |
75 |
| CALCULATIONS OF TOTAL EFFECTIVE CONDUCTING ELECTRON NUMBERS IN Ni-BASED AMORPHOUS ALLOYS WITH HIGH METALLOID CONTENTS |
Peng Ping, Liu Rangsu, Xie Quan |
80 |
| PREDICTION OF FORMABILITY PARAMETERS OF SHEET METALS |
Wang Chaoqun |
84 |
| STRUCTURE OF GLASSES AND CRYSTALS IN P2O5-PbO-Bi2O3 SYSTEM |
Lu Anxian, Huang Jiwu, Lu Renwei |
88 |
| HOT CRACKING SUSCEPTIBILITY AND MECHANICAL PROPERTIES OF 2090Ce Al-Li ALLOY WELD |
He Yong, Lin Dechao, Wang Zhongping, He Yunjia |
93 |
| WORK-SOFTENING MECHANISM OF PURE ALUMINUMS AND Al-Fe ALLOYS |
Li Fengzhen, Liu Zhaojing, Jin Quan, Yu Zemin |
98 |
| CASE ANALYSIS ON IMPROVING EXPANSION COEFFICIENT AND OTHER PROPERTIES OF THE W-Ni-Cu ALLOY |
Wang Fusheng, Zhou Zaiming, Liang Ronghai |
103 |
| CALCULATION OF Ni-Zr PHASE DIAGRAM |
Yu Hao, Jin Zhanpeng |
107 |
| ESTIMATION OF ETCHING RATE OF FeNi42 ALLOY IN FeCl3 SOLUTION BY USING CATHODIC POLARIZATION |
Li Lingchuan, Ma Jusheng, Tang Xiangyun |
112 |
| P/M HIGH ALUMINIUM-ZINC ALLOY MATERIAL AND ITS TRIBOLOGICAL CHARACTERISTICS |
Li Yuanyuan, Zhang Datong, Luo Junming, Xiao Zhiyu ,Zhang Wen, Wen Liping, Luo Zhongqiang |
117 |
| MICROSTRUCTURE STUDY OF IMPURITY CONSTITUENT PHASES IN Al-Cu-Mg-Si SERIES FORGING Al ALLOY |
Jin Tounan, Yin Zhimin |
122 |
| DEFLECTION CHARACTERISTICS OF MATERIALS'?ACOUSTIC MICROSTRUCTURES UNDER LOADING CONDITIONS |
Sun Kangning, Zhang Jingde, Liu Yuanchao, Wang Xin, Yin Yansheng, Maslove K I, Zhang S G |
125 |
| EFFECT OF PULSATING ELECTROMAGNETIC FIELD ON HOT CRACKING OF Al-Cu ALLOYS |
Ning Zhiliang, Xu Zhihui, Liang Weizhong, Cui Tianzhen ,Yang Wansheng |
134 |
| EFFECTS OF TECHNOLOGICAL PARAMETERS ON SURFACE QUALITY OF SINGLE CRYSTAL Al WIRE MADE BY CONTINUOUS CASTING |
Fan Xinhui, Wei Pengyi, Li Jianguo, Fu Hengzhi |
134 |
| FRACTURE BEHAVIOUR OF RAPIDLY SOLIDIFIED Al-2.15Li-1.28Mg-1.26Cu-0.10Zr ALLOY BY SPRAY DEPOSITION PROCESSING |
Cui Chengsong, Fan Hongbo, Lai Zhonghong, Jiang Zuling, Li Qingchun ,Mi Guofa |
138 |
| AGING CHARACTERISTICS AND DEFORMATION MECHANISMS OF A CAST Al-Si-Mg ALLOY |
Zhu Hanliang, Guo Jingjie, Jia Jun, Zhao Jiuzhou, Li Peiyong |
143 |
| AES ANALYSES OF Ti-BASED ALLOY SURFACE BY ION IMPLANTATION |
Chen Weirong |
147 |
| EFFECT OF ADDITIONS OF TRACE ELEMENTS ON CHARACTERISTICS OF RS HIGH SILICON Al POWDER |
Sun Zhangming, Chen Zhenhua, Ding Daoyun |
151 |
| EFFECTS OF ALUMINA FIBERS ON SOLIDIFIED STRUCTURE OF ZINC ALLOY COMPOSITES |
Liu Zheng, Zhu Yinglu, Chen Cigao, Liu Xiaomei |
155 |
| MEASUREMENT AND STUDY OF RESISTIVITY OF CONDUCTIVE CERAMICS BASED ON La2O3 AT HIGH TEMPERATURE |
Li Youfen, Sun Gensheng, Wu Shimin, Huang Zhiying, Gu Xuefan |
159 |
| PREPARATION OF TiC/2618 COMPOSITE BY XD METHOD |
Long Chunguang, Xu Yiheng, Li Songrui, Li Wenxian, Xiao Yude |
162 |
| COMPETITIVE GRAIN GROWTH OF DD8 HIGH TEMPERATURE ALLOY IN PLANAR AND CELLULAR INTERFACE REGION |
Liu Zhiyi ,Fu Hengzhi |
164 |
| EFFECT OF HEAT TREATMENT ON FLEXURE STRENGTH OF SILICON WAFER |
Xie Shuyin, Shi Zhiyi, Li Jidong, Dong Ping |
169 |
| ELECTRODEPOSITION OF Al-Mn AMORPHOUS ALLOY |
Li Jianchen, Ma Lijie, Yu Yan |
172 |
