中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 33 No. 6 June 2023 |
（1. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;
2. National Key Laboratory of Science and Technology for National Defense on High-strength Structural Materials, Central South University, Changsha 410083, China;
3. Advanced Research Center, Central South University, Changsha 410083, China）
Abstract:To clarify whether the Si particles rotate with respect to the matrix grains during tensile deformation of Al-Si alloys, in-situ tensile SEM and ex-situ EBSD were coupled to investigate the relationship between Si particles’ rotation and grain rotation. By comparing the on-plane projection of 3D orientations of grains revealed by EBSD and in-situ SEM observations of Si particles during deformation, noticeable relative rotation of Si particles on the sample surface plane with respect to the matrix grains was found. Besides, greater relative rotation of the Si particle was found to introduce a higher density of geometrically necessary dislocations (GNDs) which can cause work-hardening effects in the matrix nearby the Si particles, according to kernel average misorientation (KAM) analysis of EBSD data. In summary, the larger relative rotation of Si particles can cause higher work-hardening effects.
Key words: Al-Si alloy; relative rotation; geometrically necessary dislocation; in-situ tension; plastic deformation; work-hardening effect
