中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 9 September 2021 |
（1. Key Laboratory of Solid Waste Treatment and Resource Recycle (Ministry of Education), Southwest University of Science and Technology, Mianyang 621010, China;
2. State Key Laboratory for Environment-friendly Energy Materials, Southwest University of Science and Technology, Mianyang 621010, China;
3. School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang 621010, China;
4. School of Traffic and Transportation Engineering, Changsha University of Science and Technology, Changsha 410114, China）
Abstract:Porous ceramics were prepared with spodumene flotation talings (SFT), kaolin and low-melting point glass (LPG) powder, whose pores were formed by the chemical reaction of hydrogen peroxide (H2O2). LPG was used to reduce the sintering temperature of porous ceramics and kaolin was used to realize the adsorption to methylene blue (MB) of porous ceramics. The average flexural strength, compressive strength, apparent porosity, water absorption and maximum MB adsorption capacity were 5.60 MPa, 4.66 MPa, 52.27%, 44.32% and 0.7 mg/g, respectively. Moreover, the results of orthogonal experiments present that the sintering temperature and the dosage of H2O2 had great influence on the mechanical properties and apparent porosity of porous ceramics, respectively. The main reason for the improvement of mechanical properties of porous ceramics was that LPG gradually became soft with increasing the sintering temperature, which made the mineral particles adhere to each other closely. Kaolinite was not completely converted into metakaolin at 550 °C, which might be the main reason why porous ceramics had adsorption properties.
Key words: spodumene flotation tailings; porous ceramics; low-temperature sintering; absorption
