中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 1 January 2021 |
（1. Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, China;
2. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China）
Abstract:A model was built to simulate liquid aluminum leakage during the casting process, including transient trough flow, orifice outflow, and spread, to prevent the explosion. A comparison between the simulation data and the theoretical calculation results verifies that the model has remarkable adaptability and high accuracy. Although the height of liquid aluminum in the mixing furnace and outlet radius are changed, the molten aluminum will not leak during the casting process. The aluminum in the trough moves forward in a wave-like motion and causes a leakage. The spread of the leaked aluminum resembles a long strip on the ground. The leakage amount and spread area of liquid aluminum increase with increasing the height of liquid aluminum in the mixing furnace.
Key words: liquid aluminum leakage; explosion; leakage state; spread pattern; numerical simulation; volume of fluid (VOF) model
