中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 27 No. 10 October 2017 |
（1. School of Mechanical and Electrical Engineering, Nanchang University, Nanchang 330031, China; 2. Key Laboratory of Light Alloy Preparation and Processing in Nanchang City, Nanchang 330031, China）
Abstract:The effects of solution treatment on the evolution of the second phases and mechanical properties of 7075 Al alloy were studied with scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), differential scanning calorimetry (DSC), hardness and tensile tests. The results show that Mg(Zn,Cu,Al)2 phases gradually dissolve into the matrix, yet the size and morphology of Al7Cu2Fe phase exhibit no change with the increase of the solution treatment temperature and time due to its high melting point. When the solution treatment temperature and time continue to increase, the formation of coarse black Mg2Si particles occurs. Compared to the as-cast alloy, the microhardness, tensile strength, and elongation of the sample under solution heat treatment at 460 °C for 5 h are increased by 55.1%, 40.9% and 109.1%, respectively. This is because the eutectic Mg(Zn,Cu,Al)2 phases almost completely dissolve and basically no coarse black Mg2Si particles are formed.
Key words: solution treatment; microstructure evolution; second phases; mechanical properties; 7075 Al alloy
