Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首頁 - 期刊簡介 - 詳細頁面

中國有色金屬學報

ZHONGGUO YOUSEJINSHU XUEBAO

第27卷    第3期    總第216期    2017年3月

[PDF全文下載]        

    

文章編號:1004-0609(2017)-03-0459-09
Al-Zn-Mg-Cu-Zr-0.12Ce合金鑄錠的均勻化退火及組織演變
袁新雄1,尹登峰1, 2,余鑫祥1,潘康觀1,盧少康1,胡婷1,呂正風2,祝貞鳳2

(1. 中南大學 材料科學與工程學院,長沙 410083;
2. 煙臺南山學院 工學院,煙臺 265713
)

摘 要: 采用光學顯微鏡(OM)、掃描電鏡(SEM)、電子探針(EPMA)、波譜分析(WDS)、X射線衍射(XRD)以及差示掃描量熱儀(DSC)等技術對Al-Zn-Mg-Cu-Zr-0.12Ce合金鑄態(tài)組織及均勻化退火過程中的組織演變進行研究。結果表明:該合金鑄態(tài)組織存在嚴重的枝晶偏析,主要由α(Al)基體、α(Al)+Mg(Zn, Al, Cu)2 非平衡共晶組織以及少量的θ(Al2Cu)相、Al8Cu4Ce相、Al7Cu2Fe相構成;均勻化退火過程中,大量層片狀共晶組織溶入基體,同時轉變生成Al2CuMg相;合金的過燒溫度為474.87 ℃;合金的最佳單級均勻化退火工藝為465 ℃、40 h,這與均勻化動力學方程測算結果接近;合金經(435 ℃,8 h)+(470 ℃,32 h)雙級均勻化退火處理后,回溶效果更好,主要殘留相為難溶的Al2CuMg相,少量含F(xiàn)e雜質相以及Al8Cu4Ce相。

 

關鍵字: Al-Zn-Mg-Cu-Zr-0.12Ce合金;均勻化;組織演變;均勻化動力學

Homogenization treatment of as-cast Al-Zn-Mg-Cu-Zr-0.12Ce aluminum alloy and microstructure evolution during homogenization
YUAN Xin-xiong 1, YIN Deng-feng1, 2, YU Xin-xiang1, PAN Kang-guan1, LU Shao-kang1, HU Ting1, Lü Zheng-feng2, ZHU Zhen-feng2

1. School of Materials Science and Engineering, Central South University, Changsha 410083, China;
2. School of Engineering, Yantai Nanshan University, Yantai 265713, China

Abstract:The microstructure of the as-cast Al-Zn-Mg-Cu-Zr-0.12Ce aluminum alloy and microstructure evolution during homogenization were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), electron probe micro-analyzer (EPMA), wavelength dispersive spectroscopy (WDS), X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The results indicate that the severe dendritic segregation exists in Al-Zn-Mg-Cu-Zr-0.12Ce alloy ingot. The as-cast microstructure mainly involves α(Al), non-equilibrium eutectics (α(Al)+Mg(Zn, Al, Cu)2), and small amounts of θ(Al2Cu), Al8Cu4Ce and Al7Cu2Fe phases. During homogenization, the lamellar eutectic structures in the as-cast alloy is dissolved into the matrix, meanwhile, a transformation from Mg(Zn, Al, Cu)2 to Al2CuMg phase also occurs. The overburnt temperature of the alloy is 474.87 ℃. The optimum parameters of single homogenization are (465 ℃, 40 h), which is consistent with the result of homogenization kinetic analysis. The eutectic phases are eliminated more sufficiently with two-step homogenization treatment at 435 ℃ for 12 h and then at 470 ℃ for 32 h. The residual second particles after homogenization are some small Al2CuMg, Fe-rich and Al8Cu4Ce phases.

 

Key words: Al-Zn-Mg-Cu-Zr-0.12Ce alloy; homogenization; microstructure evolution; homogenization kinetics

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中國科學技術協(xié)會 主辦:中國有色金屬學會 承辦:中南大學
湘ICP備09001153號 版權所有:《中國有色金屬學報》編輯部
------------------------------------------------------------------------------------------
地 址:湖南省長沙市岳麓山中南大學內 郵編:410083
電 話:0731-88876765,88877197,88830410   傳真:0731-88877197   電子郵箱:f_ysxb@163.com  
当涂县| 上杭县| 甘南县| 勐海县| 辽宁省| 林周县| 右玉县| 延吉市| 微博| 宿迁市| 玉树县| 克东县| 建昌县| 宝清县| 广宗县| 洮南市| 高邑县| 宁夏| 双辽市| 辽宁省| 突泉县| 额济纳旗| 虹口区| 交城县| 东台市| 宜丰县| 新密市| 高安市| 晋州市| 年辖:市辖区| 东乡| 南丹县| 沁水县| 云安县| 邵武市| 凤城市| 泰来县| 江川县| 航空| 汶上县| 丹巴县|