(中國科學院 金屬研究所，沈陽 110016)
摘 要: 通過組織形貌觀察和蠕變性能測試，研究了含鉿高鎢K416B鎳基鑄造合金的組織及蠕變機制。結果表明：合金鑄態組織由γ基體、γ?相、MC和M6C型碳化物組成；其中，MC碳化物主要以鏈狀和漢字型結構分別在晶界和枝晶間析出，而大塊狀M6C碳化物鑲嵌在共晶處；蠕變期間，合金的變形機制是位錯在基體中可沿不同方向發生滑移，且位錯可繞過或剪切γ′相；蠕變后期，高密度位錯在碳化物和晶界處塞積，產生應力集中，致使裂紋沿晶界和碳化物/共晶界面處萌生及擴展是合金的斷裂機制。
關鍵字: K416B鎳基合金；顯微組織；蠕變行為；斷裂機制
（Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China）
Abstract:By means of microstructure observation and creep property measurement, the microstructure and creep mechanism of Hf-containing K416B as-cast Ni-based superalloy with high W content were investigated. The results show that the as-cast microstructure of the alloy consists of γ matrix, γ? phase, MC and M6C carbides. Thereinto, the MC carbide with chain-like structure and Chinese script precipitates, in the grain boundaries and inter-dendrite, respectively. And the blocky M6C carbide embeds in the eutectic. During creep, the deformation mechanisms of the alloy are that the dislocations with different orientations slip in the matrix, and the dislocation may bypass or shear into γ? phase. In the late stage of creep, high density dislocations may pile up near the carbides or boundaries, and the fact may induce the stress concentration to cause the crack initiating and propagating along the grain boundaries and the interface between the carbide and eutectic, which is considered to be the fracture mechanism of the alloy.
Key words: K416B Ni-based superalloy; microstructure; creep behavior; fracture mechanism
