(1. 河南科技大學 材料科學與工程學院，洛陽 471003；
2. 河南科技大學 有色金屬共性技術河南省協同創新中心，洛陽 471003；
3. 上海理工大學 材料科學與工程學院，上海 200093)
摘 要: 在Gleeble-1500D熱模擬試驗機上對Cu-Cr-Zr-Nd合金進行熱壓縮實驗，對合金在應變速率分別為0.001、0.01、0.1、1、10 s-1，變形溫度分別為650、750、850、900、950 ℃的高溫變形過程中的流變應力行為、熱變形過程中的組織演變和動態再結晶機制進行研究。結果表明：流變應力隨變形溫度的升高而減小，隨應變速率的提高而增大。Cu-Cr-Zr-Nd合金在熱變形過程中的動態再結晶機制受變形溫度和應變速率的影響。當溫度為900 ℃、應變速率為10 s-1時，Cu-Cr-Zr-Nd合金發生完全的動態再結晶。從流變應力、應變速率和溫度的相關性，得出該合金高溫熱壓縮變形時的熱變形激活能Q為404.84 kJ/mol，同時利用逐步回歸的方法建立該合金的流變應力方程。
關鍵字: Cu-Cr-Zr-Nd合金；高溫壓縮；流變應力方程；熱激活能；動態再結晶
（1. College of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China;
2. Collaborative Innovation Center of Nonferrous Metals, Henan University of Science and Technology, Luoyang 471003, China;
3. College of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China）
Abstract:The high temperature deformation behavior, microstructure evolution and dynamic recrystallization nucleation mechanisms of Cu-Cr-Zr-Nd alloy were investigated by compressive tests using Gleeble-1500D thermal-mechanical simulating tester at the deformation temperatures of 650, 750, 850, 900, 950 ℃ and strain rates of 0.001, 0.01, 0.1, 1, 10 s-1. The results show that the flow stress decreases with the increase of temperature, and the flow stress increases with the increase of strain rate. The dynamic recrystallization process of Cu-Cr-Zr-Nd alloy is controlled by deformation temperature and strain rate. The dynamic recrystallization is complete when the temperature and strain rate are 900 ℃ and 10 s-1, respectively. The hot deformation activation energy Q is 404.84 kJ/mol and constitutive equation is obtained from the correlativity of flow stress, strain rate and temperature by stepwise regression analysis.
Key words: Cu-Cr-Zr-Nd alloy; high temperature compression; constitutive equation; hot deformation activation energy; dynamic recrystallization
