Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首頁 - 期刊簡介 - 詳細頁面

中國有色金屬學報

ZHONGGUO YOUSEJINSHU XUEBAO

第25卷    第2期    總第191期    2015年2月

[PDF全文下載]        

    

文章編號:1004-0609(2015)02-0323-07
高應變率下TC4-DT鈦合金的動態力學性能及塑性本構關系
張長清1,謝蘭生1,陳明和1,商國強2

(1. 南京航空航天大學 機電學院,南京 210016;
2. 北京航空材料研究院,北京 100095
)

摘 要: 為研究TC4-DT鈦合金的動態力學性能及其本構關系,在1000~8000 s-1應變率范圍內,利用分離式Hopkinson壓桿試驗裝置對該材料進行動態壓縮試驗,得到高應變率下的真實應力-應變曲線。結果表明:高應變率時TC4-DT鈦合金材料存在應變率增強、增塑以及應變強化效應,其流變應力表現出較強的應變率敏感性。通過微觀組織觀察,發現高應變率變形時出現絕熱剪切帶是材料流變應力急劇減小的主要原因。改進Johnson-Cook本構模型中的溫度項,利用試驗數據對TC4-DT鈦合金在高應變率下的動態塑性本構關系進行擬合,得到室溫下該材料的動態塑性本構方程,模型計算結果和試驗結果證明該模型可以更好地預測TC4-DT鈦合金高應變率下的塑性流變應力。

 

關鍵字: TC4-DT鈦合金;動態力學性能;Hopkinson壓桿試驗;Johnson-Cook本構模型

Dynamic mechanical property and plastic constitutive relation of TC4-DT Ti alloy under high strain rate
ZHANG Chang-qing1, XIE Lan-sheng1, CHEN Ming-he1, SHANG Guo-qiang2

1. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics,
Nanjing 210016, China;
2. Beijing Institute of Aeronautical Materials, Beijing 100095, China

Abstract:The dynamic compression experiments of TC4-DT Ti alloy were performed at a range of strain rate from 1000 s-1 to 8000 s-1 by high split Hopkinson pressure bar for investigating its dynamic mechanical property and constitutive relation, and the true stress-strain curves under high strain rates were obtained. The results show that the true flow stress of TC4-DT is sensitive to the strain rates and TC4-DT has strain rate strengthening, plasticity-increasing and strain work-hardening. The observation of cross-section microstructure of deformed sample reveals that the adiabatic shear band is responsible for the rapid reduction of flow stress when TC4-DT was deformed at high strain rate. Based on the Johnson-Cook constitutive model, with new temperature item, the dynamic constitutive model of TC4-DT was obtained by fitting the experimental results. The comparison between the calculated curves and experimental results shows that the present dynamic constitutive model can make a better prediction of the plastic flow stress.

 

Key words: TC4-DT Ti alloy; dynamic mechanical property; split Hopkinson pressure bar test; Johnson-Cook constitutive model

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中國科學技術協會 主辦:中國有色金屬學會 承辦:中南大學
湘ICP備09001153號 版權所有:《中國有色金屬學報》編輯部
------------------------------------------------------------------------------------------
地 址:湖南省長沙市岳麓山中南大學內 郵編:410083
電 話:0731-88876765,88877197,88830410   傳真:0731-88877197   電子郵箱:f_ysxb@163.com  
老河口市| 兰考县| 鸡西市| 桐庐县| 尚义县| 北票市| 嘉义市| 汉源县| 铜山县| 内黄县| 封开县| 华亭县| 江都市| 高邮市| 内丘县| 黎城县| 高清| 乐东| 万宁市| 广安市| 惠东县| 滨海县| 定西市| 天祝| 大城县| 克拉玛依市| 东海县| 缙云县| 七台河市| 乌兰察布市| 永新县| 昌邑市| 巴林左旗| 岫岩| 盈江县| 安岳县| 尚义县| 灵宝市| 锡林郭勒盟| 乌鲁木齐县| 临武县|