(清華大學，汽車安全與節能國家重點實驗室，北京 100084)
摘 要: 通過單向拉伸與壓縮試驗，研究AZ31B鎂合金擠壓材料的力學性能，并建立相應的本構模型。結果表明：室溫下AZ31B鎂合金擠壓材料的宏觀力學性能存在顯著的各向異性和拉壓非對稱屈服的現象，且在塑性流動過程中，屈服面的演化也呈現出各向異性的特點，即畸變硬化特性。基于系統的試驗結果，結合考慮了各向異性和拉壓非對稱性的CPB06屈服面函數，采用解析函數形式的本構參數來描述畸變硬化特性，建立了一種唯象的鎂合金材料塑性流動本構模型。通過用戶材料子程序VUMAT，將本構模型應用于缺口試件拉伸的有限元模擬中，計算結果與試驗結果吻合較好，證實了本構模型的適用性。
關鍵字: 鎂合金；畸變硬化；本構模型；有限元模擬
（Tsinghua University, State Key Laboratory of Automotive Safety and Energy, Beijing 100084, China）
Abstract:By conducting uniaxial tension and compression tests, the mechanical properties of extruded AZ31B magnesium alloy were studied and a suitable constitutive model was established. The results show that the yielding response of extruded AZ31B alloy exhibits significant anisotropy and tension-compression asymmetry, and the evolution of yield surface during plastic flow also exhibits great anisotropy, known as distortional hardening effect. By introducing an analytical evolving law for the distortional hardening effect, a phenomenological constitutive model was established based on the CPB06 yield function, which accounts for both anisotropy and tension-compression asymmetry. The model was programmed to the user material subroutine interface VUMAT and applied to the finite element simulation of the tension tests of a grooved specimen. The computational results coincide well with the experimental ones, which demonstrates the predictive efficiency of this constitutive model.
Key words: magnesium alloys; distortional hardening; constitutive model; finite element simulation
