中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 23 No. 1 January 2013 |
（1. School of Materials Science and Engineering, Central South University, Changsha 410083, China;
2. Key Laboratory of Nonferrous Metal Materials Science and Engineering, Ministry of Education,
Abstract:The microstructures of as-extruded and stabilizing heat-treated Zn-10Al-2Cu-0.02Ti alloys were observed by scanning electron microscopy, transmission electron microscopy, electron probe microanalysis and X-ray diffraction analysis techniques. The change in structure after heat treatment and its effects on room temperature creep behavior were investigated by creep experiments at constant stress and slow strain rate tensile tests. The results show that after stabilizing heat treatment ((350 °C, 30 min, water-cooling)+(100 °C, 12 h, air-cooling)), the amount of α+η lamellar structure decreases, while the amount of cellular and granular structure increases. The heat-treated Zn-10Al-2Cu-0.02Ti alloy exhibits better creep resistance than the as-extruded alloy, and the rate of steady state creep decreases by 96.9% after stabilizing heat treatment.
Key words: Zn-10Al-2Cu-0.02Ti alloy; stabilizing heat treatment; microstructure; creep behavior
