(1. 中南大學 能源科學與工程學院，長沙 410083；
2. 重慶天泰鋁業有限公司，重慶 401328)
摘 要: 為了進一步降低鋁電解工業能耗，以仿真軟件ANSYS及ANSYS-FLUENT為平臺，應用陽極穿孔方式對鋁電解用陽極進行結構優化，并進行工業試驗，以研究其工業應用并驗證仿真結果。計算結果表明：新型陽極下氣泡層厚度為1.28 cm，比普通陽極氣泡層厚度減少0.72 cm，對應極距電壓差約240 mV；陽極表面溫度最低為704.3 ℃，陽極電壓降為379 mV，電場分布與普通陽極保持一致；陽極碳?jí)K熱應力最大值為17.4 MPa，遠低于碳?jí)K的許用應力。新型陽極在3臺槽上進行試驗，長期運行的平均槽電壓比傳統電解槽的降低了229 mV，穿孔陽極結構電解槽電流效率從91.15%提高到91.85%，生產每噸鋁直流電耗降低了683 kW∙h。仿真結果與實驗結果相符，說明此結構陽極能夠快速排出氣泡進而減小極距。
關鍵字: 鋁電解槽；低能耗；穿孔陽極結構；氣泡層厚度；多物理場耦合；數值模擬；工業試驗
（1. School of Energy Science and Engineering, Central South University, Changsha 410083, China;
2. Chongqing Tiantai Aluminum Industry Co., Ltd., Chongqing 401328, China）
Abstract:The perforation in the carbon block to optimize the structure of anode was researched by using simulation software ANSYS and ANSYS-FLUENT in order to reduce the energy consumption of aluminium reduction industry further more. The industrial test was carried out to study the industrial applications and verify the simulation result. The simulation results show that the bubble layer thickness of the perforated anode is 1.28 cm, reduced by 0.72 cm compared with that of the normal anode, the corresponding voltage is about 240 mV. The minimum temperature of anode block is 704.3 ℃, and the voltage drop of the perforated anode is 379 mV and the current density distribution of the perforated anode and ordinary anode are consistent. The maximum of thermal stress is 17.4 MPa in the perforated anode, which is far less than the allowable stress. The perforated anode industrial test was conducted on three cells. The average cell voltage of perforated anodes decreases by 229 mV compared with the traditional reduction cell after long-term operation, and the current efficiency increases from 91.15% to 91.85%. The production per ton aluminium direct current (DC) consumption of perforated anode reduces by 683 kW∙h. The experimental results agree with the theoretical calculation, which indicates that the polar distance of the perforated anode is decreased because the bubbles exhaust quickly.
Key words: aluminum reduction cell; low power consumption; perforation structure anode; bubble layer thickness; coupled multi-field; numerical simulation; industrial test
