(沈陽師范大學 化學與生命科學學院，沈陽 110034)
摘 要: 研究四元三相Cu-20Ni-20Cr-5Co合金在700-900℃、0.1MPa純氧氣中的氧化行為以及添加第四組元Co對三元三相Cu-20Ni-20Cr合金氧化行為的影響。結果表明：合金為三相混合物，其氧化動力學曲線偏離拋物線規律，由幾個線段組成，添加5%Co后合金的氧化速率明顯降低。Cu-20Ni-20Cr-5Co合金表面形成的氧化膜外層主要是由CuO組成，內層是合金與氧化物組成的混合內氧化區，最終合金內層表面形成一連續的Cr2O3層，阻止合金的進一步氧化。
關鍵字: Cu-20Ni-20Cr-5Co合金；三相組織；添加組元； 高溫氧化
quaternary three-phase Cu-20Ni-20Cr-5Co alloy
（College of Chemistry and Lift Science, Shenyang Normal University, Shenyang 110034, China）
Abstract:The oxidation of a quaternary three-phase Cu-20Ni-20Cr-5Co alloy formed by adding 5% Co (mole fraction) to Cu-20Ni-20Cr alloy was studied at 700−900 ℃ in 0.1 MPa pure oxygen. The results show that the alloy contains a mixture of three phases, and its kinetic curves deviate considerably from the parabolic rate law and are composed of a few of stages. The oxidation rates become lower evidently after 5% Co is added to Cu-20Ni-20Cr alloy. The Cu-20Ni-20Cr-5Co alloy forms the external scales containing CuO and an inner oxidation region containing a mixture of alloy and oxides. At last, this alloy is able to form a continuous layer of Cr2O3 at the top of the mixed inner region. It prevents this alloy from being oxidized further.
Key words: Cu-Ni-Cr-Co alloy; three-phase morphology; adding component; high temperature oxidation
