(1. 上海大學 材料科學與工程學院，上海 200072；
2. 蘇州有色金屬研究院有限公司 材料工藝研究所，蘇州 215026)
摘 要: 結合鎂合金鑄軋工藝特點，分析鎂合金板坯鑄軋過程中凝固層焊合點位置與板坯缺陷的影響規律；針對板坯厚度、鑄軋區長度及鑄軋速度等關鍵參數，簡化凝殼徑向生長及凝固前沿周向轉動過程，確定鑄軋速度匹配范圍，建立凝固層焊合點位置控制模型，并通過工藝試驗對控制模型進行驗證。結果表明：通過理論模型確定工藝匹配范圍，可穩定并優化鎂合金鑄軋工藝，大幅度降低鑄軋板坯宏觀缺陷，獲得表面光潔、質量良好的鎂合金鑄軋板坯。
關鍵字: 鎂合金；雙輥鑄軋；凝固層焊合點；控制模型；工藝優化
（1. School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China;
2. Department of Materials Science and Technology, Suzhou Nonferrous Metals Research Institute,
Suzhou 215026, China）
Abstract:The effect of kiss-point position of solidification layer of twin-roll casting on macro-defects of magnesium alloys strip was analyzed through experiments and theoretical derivation. A kiss-point model which considers the strip thickness, set-back length and roll speed was established to optimize the process and enhance the surface quality of magnesium alloys strip. The results show that the model of kiss-point of solidification layer effectively stabilizes and optimizes the twin-roll casting processing, and the defect-free magnesium alloys strip is obtained by twin-roll casting.
Key words: magnesium alloys; twin-roll casting; kiss-point of solidification layer; model; process optimization
