(吉林工業大學金屬材料工程系，長春130025)
摘 要: 對Zn78Al22合金在鑄造和固溶處理之后，采用塑性變形和循環相變?cè)偌由蠒r(shí)效，可以減小晶粒尺寸。結果表明，采用315、300℃加熱、室溫時效、循環相變5次或300℃加熱0℃時效，可使合金的粒狀晶粒尺寸減小到100nm。
關鍵字: Zn-Al合金 鈉米級合金 循環相變 細晶粒
NANOSTRUCTURED Zn-Al ALLOY
（Deptartment of Metal Material Engineering, Jilin University of Technology, Changchun 130025）
Abstract:After casting and solution-treatment on Zn78Al22alloy, the phase transformation circles, the plastic deformation and aging were used to decrease the grain size of the alloys. The results show that the granular grain size of the alloys can be decreased to 100nm by the phase transformation circles when the heating temperature is 315℃and the aging temperature is ambient one or when the heating temperature is 300℃and the aging temperature is 0℃.
Key words: Zn-Al alloy nanostructured alloy phase transformation circle fine grain
