(東北大學有色金屬系冶金物化教研室，沈陽110006)
摘 要: 用化學鍍法在活性鋁粉表面包覆純鎳層制備Ni-Al復合粉末。結果表明，控制溫度為86~89℃、 pH= 12.5~13.2 、硫酸鎳加入量為35.0~45.0 g/ L、還原劑加入量為75~95 mL/ L時可獲得鍍覆質量良好的粉末，且鎳呈結晶態析出。此外還討論了這些工藝參數對鍍覆質量的影響。
關鍵字: 化學鍍 復合粉末 鍍覆質量 工藝條件
BY ELECTROLESS NICKEL PLATING
（Department ofNonferrous Metallurgy,
Northeastern University, Shenyang110006）
Abstract:The composite powders were produced by electroless pure-nickel plating on the surface of activated aluminium powders. The experimental results showed that the well-qualified composite powders can be made by controlling technological parameters and nickel appears in crystal state. The influence of the technological parameters on the coating quality was also given.
Key words: electroless plating composite powders coating quality technological conditions
