(中南工業大學粉末冶金研究所，長沙410083)
摘 要: 介紹了SiC顆粒增強Al-Cu合金疊層復合材料的制備方法，研究了疊層復合材料的抗彎強度和增強層的耐磨性與SiC顆粒含量的關系。結果表明，SiC顆粒體積分?jǐn)?shù)為20%時該材料的抗彎強度最大，磨損量最小；SiC顆粒與基體結合強度及層間宏觀應力影響材料的強度性能。
關鍵字: 碳化硅顆粒 鋁合金 疊層復合材料
WEAR RESISTANCE OF Al ALLOY LAMINATED
COMPOSITE STRENGTHENED BY SiC PARTICLES
（Powder Metallurgy Research Institute,
Central South University of Technology, Changsha 410083）
Abstract:Fabricating method of Al-Cu laminated composite strengthened by SiC particles has been introduced. The relation between bending strength, wear resistance of the composite and the content of SiC particles has been studied. The results showed that, when the amount of SiC particles is 20%, the comprehensive properties of the composite, the bending strength and the wear resistance are the best. The bending strength between SiC particles and the Al-Cu matrices and the interstratified stress affect apparently the properties of the composite.
Key words: SiC particles aluminium alloys laminated composite
