(中南工業大學冶金系，長沙410083)
摘 要: 將含有TiB2、碳纖維和熱固性粘結劑的涂料，涂敷到鋁電解槽的陰極基體上，制備出可潤濕的陰極表而。經固化和碳化后，涂層和碳質基體材料的粘結力強，熱膨脹匹配性好。每臺硼化鈦涂層陰極試驗槽能節省NaF250~300kg，試驗槽的電流效率高出對比槽1. 44%，能耗降低175~211 kW·h/t Al。
關鍵字: 鋁電解槽 硼化鈦粉 陰極涂層
（Department of Metallurgy, Central South University of Technology, Changsha 410083）
Abstract:Cathode coating TiB2,carbon fibre and therm osetting binder were coated on the matrix of the cathode in aluminium reduction cell to prepare aluminium werrable cathode surface.By cure and carbonization,this coating wa characterized by strong bonding to cathode matrix and good thermal expansion match.NaF could be saved by 250~300kg when TiB2 coating was applied in a cell;current efficiency of the test froup wa 89.54%, which was 1.44% higher than that of compared group, and energy saving was 175~211kW·h/t Al.
Key words: aluminium reduction cell TiB2 TiB2-coating cathode
