文章編號：(1997)02-133-3
升溫速度對自蔓延高溫合成Al/TiC復合材料的影響
梅炳初 孫曉冬 莊乾東 袁潤章
(武漢工業大學國家重點實驗室，武漢 430070)
摘 要: 利用自蔓延高溫合成的熱爆方式，采用Ti、C和Al三種粉末原料，合成了Al/TiC復合材料。研究了升溫速度對試樣的尺寸變化、熱爆開始溫度、反應最高溫度、產物的相組成、密實度以及微觀結構的影響。
關鍵字: 升溫速度 自蔓延高溫合成 A1/TiC復合材料
EFFECT OF HEATING RATE ON SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS OF Al/TiC COMPOSITES
Mei Bingchu, Sun Xiaodong, Zhuang Qiandong, Yuan Runzhang
（The National Lab of Key Technology for Composites,
Wuhan University of Technology, Wuhan 430070）
Abstract:Al/TiC composites were synthesized by the thermal explosion mode of self-propagating high-
temperature synthesis (SHS) from Ti, C and Al powders. The effects of the heating rate on the ignition temperature, the combustion temperature, the phase composition, the relative density and the microstructure of the products were studied.
Key words: heating rate SHS Al/TiC composites
