(吉林工業大學工程仿生研究所，長春 130025;
*哈爾濱工業大學材料科學與工程學院，哈爾濱 150001)
摘 要: 通過雙級霧化過程分析，建立了霧滴經歷兩次破碎的飛行和冷卻數學模型，并進行了模擬計算；利用模擬計算結果分析了霧化工藝參數，并通過實驗進行了初步的驗證。結果表明：該模型基本能預測雙級霧化霧滴的飛行和冷卻過程，可為雙級霧化工藝參數的選擇提供理論依據。
關鍵字: 霧化 數值模擬 霧滴
（The Research Institute for Engineering Bionics, Jilin University of Technology, Changchun 130025, P. R. China
*Harbin Institute of Technology, Harbin 150001）
Abstract:A computer model has been developed to describe the dynamic and thermal behavior of droplets in fragmentation process based on the studies on two stage atomization process. According to the model, the dynamic and thermal behavior of Al-20Si alloy droplets were calculated, and the technological parameter of two-stage atomization was discussed. The calculated result was also verified by atomization testing.
Key words: atomization; computer; simulation; droplet
