(中南工業大學 熱工設備仿真與優化研究所， 長沙 410083)
摘 要: 根據灰色理論，采用新陳代謝灰色建模法對銅锍品位的歷史數據建立了GM(1， 1)模型群，并對各維模型進行了精度檢驗，計算表明維數為4～6時模型精度達A級， 維數繼續增大則模型的精度變差。 選出精度高的模型對當前加入連續吹煉爐的銅锍的品位進行預測并做均值化處理， 采用此法對現場90余班次的數據進行了預測計算， 與化驗值相比， 預測值的平均絕對誤差在±0.5%以內。
關鍵字: 灰色預測； 灰色模型； 銅锍品位；吹煉
（Institute on Simulation & Optimization of PyroInstallations,Central South University of Technology， Changsha 410083, P.R.China）
Abstract:Based on the grey theory, by adopting metabolism grey modeling method, a series of GM(1, 1) models for the historical matte grade data were developed, and the accuracy of each model was also tested.The result shows that the grade of the models' accuracy is A as the dimension of the sequence is from 4 to 6. The grade of matte currently added in the continuum converting furnace can be gained by averaging the predicted value of the highaccuracy models. The comparison betwe, en the predicted value and the assay result shows an average absolute error only ±0.5%.
Key words: grey predict; gray model; matte grade; converting
