(哈爾濱工業大學材料科學與工程學院，哈爾濱150001)
摘 要: 采用改進后的SOLA-VOF方法處理自由表面，有效地克服了傳統的SOLA-VOF法中的“施體-受體”法在處理三維自由表面時精度差和時間步長小的缺點。在自由表面處理上采用了新的壓力插值函數，使三維自由表面的處理變得簡單明了。用有限差分法建立了鑄件三維充型過程流動與傳熱的耦合計算數值模型，并對大型薄壁鋁合金鑄件進行了數值計算。后處理中采用插值技術，直觀地顯示了充填過程中自由表面的位置和形狀。
關鍵字: 大型薄壁件；SOLA-VOF；流體流動；傳熱
ZHANG Chun-hui, MA Jian
（School of Materials Science and Engineering, Harbin Institute o f Technology, Harbin 150001, P.R.China）
Abstract:The numerical model for 3D fluid flow coupled with heat transfer was established with FDM and the free surfaces were handled by an improved SOLA-VOF technique. A pressure interpolation function was adopted as the free surface boundary condition. The example of large thin-wall Al-alloy casting was calculated with this model. In the post-processing, the location and shape of free surfaces during mold filling were displayed visually with a linear interpolation method.
Key words: large thin-wall castings; SOLA-VOF; fluid flow; heat transfer
