(北京有色金屬研究總院，北京 100088)
摘 要: 采用電磁攪拌連續鑄造裝置，制備具有觸變性非枝晶組織的半固態鋁合金圓棒。棒料內部組織形貌為具有類圓形輪廓的初生相晶粒浸潤在細共晶體中，與傳統的凝固枝晶組織有顯著差異。對半固態非枝晶組織的演化機理進行了探討，結果表明處于交變電磁場中的金屬液體，可視為導電介質流，它與磁場交互作用，在導電介質流中產生徹體力。半固態非枝晶組織是在晶體正常的形核和長大過程中，受徹體力強烈的混合抑制作用而形成的。
關鍵字: 連續鑄造；凝固組織；半固態合金；轉變機制
（General Research Institute for Nonferrous Metals, Beijing 100088, P.R.China）
Abstract:Experiments on semi-solid slurry forming were carried out by practical electromagnetic stirring-continuous casting method. Through optimizing the processing parameters, semi-solid Al-7%Si alloy cylinders with thixotropic non-dentritic structures were successfully produced. The diameter of the cylinder is in the range of 60～110mm. The original phase crystalline grains with roundish configuration are merged in fine eutetic-crystal, and this kind of microstructure is apparently different from conventional solidification crystal structure. The forming mechanism of the semi-solid rheological non-dentritic structures was discussed, the results show that the semi-solid non-dendritic structures are resulted from the strong restraint of normal crystal nucleation and growth in the semi-solid process.
Key words: continuous casting; solidification microstructure; semi-solid alloys; transform mechanism
