吸氮行為的影響
鄭 啟1， 管恒榮1， 胡壯麒1
(1. 中國科學院 金屬研究所， 沈陽 110016;
2. 山東理工大學 化學工程學院, 淄博 255012)
摘 要: 研究了不同溫度的熔體過熱處理對M963合金吸氮行為的影響。 結果表明：在1600-1650℃進行熔體過熱處理, 合金中的氮含量因精煉作用而略有降低； 但當過熱溫度達到1700℃時， 由于熔體結構的變化而使合金開始吸氮；當過熱溫度達到1850℃時， 合金中的氮含量由原來的0.0006%（質量分?jǐn)?shù)） 急劇增加到0.0047%（質量分?jǐn)?shù)）。
關鍵字: 熔體過熱處理; 高溫合金; 氮; 熔體結構
ZHENG Qi1, GUAN Heng-rong1, HU Zhuang-qi1
（1. Institute of Metal Research, Chinese Academy of Sciences,
Shenyang 110016, China;
2. College of Chemical Engineering,
Shandong University of Technology, Zibo 255012, China）
Abstract:The effect of melt-superheating treatment at different temperatures on the nitrogen-absorption behavior of the nickel-base superalloy M963 was investigated. The results show that, the melt-superheating treatment between 1600℃ and 1650℃ can cause a slight decrease in nitrogen content of the alloy owing to the refinement; but the melt-superheating treatment above 1700℃ begins to increase the nitrogen content of the alloy because it changes the melt structure; and when the melt-superheating temperature reaches 1850℃, the nitrogen content of the alloy increases from 0.0006% to 0.0047%.
Key words: melt-superheating treatment; superalloy; nitrogen; meltstr
