(中南大學 粉末冶金國家重點實驗室， 長沙 410083)
摘 要: 研究了3種燒結活化劑（葡萄糖、 酚醛樹脂和硬脂酸）和不同的摻碳量對碳化硼燒結的影響。發現活化劑葡萄糖優于其它兩種活化劑， 以葡萄糖為活化劑， 摻碳3%， 在2270℃氫氣中常壓燒結1h獲得的碳化硼材料密度為2.06g/cm3(相對密度82%), 這一密度高于文獻中報道的采用相同粒度粉末制得的結果。
關鍵字: 碳化硼； 活化燒結； 燒結活化劑
（State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China）
Abstract:The influences of carbon-doping activator (glucose, phenolic resin and stearic acid) and carbon-doping amount on sintered density of boron carbide were studied. It is discovered that glucose is much better than the others. A sintered density of 2.06g/cm3(82%TD) was obtained by doping 3% carbon using glucose as the activator precursor and pressureless sintering at temperature of 2270℃ for 1h in hydrogen. This density is higher than that of the literature reported using the powder with nearly the same particle size.
Key words: boron carbide; activated sintering; sintering activator
