(1. 北京科技大學 冶金學院，北京 100083；
2. 中國科學院 過程工程研究所，北京 100080)
摘 要: 測定了在不同條件下，合成高爐渣中TiO2被碳還原時泡沫渣高度與時間的關系。由實驗數據和改進的計算程序確定了該發泡過程的發泡特性參數，實現了對發泡過程進行定量描述。著重分析了初渣中TiC的含量和還原過程產生TiC對發泡過程的影響，確定了引起含高TiO2渣在發泡時產生多次發泡的原因。
關鍵字: 泡沫渣；高爐渣；TiO2還原；內生氣源；TiC
process originated from reducing TiO2 in
synthetic blast furnace slag
ZUO Bing1，ZHA NG Er-hua1
（1. School of Metallurgy，University of Science and Technology Beijing，
Beijing 100083，China;
2. Institute of Process Engineering，The Chinese Academy of Sciences，
Beijing 100080，China）
Abstract:The relationship between the foam height and time is measured for foaming processes originated from reducing TiO2 in the synthetic blast furnace slag under different condition. The foam behavior parameter is determined by means of the experimental results and the modified computer program. In this way，this foaming process can be described quantitatively and the influence of TiC content in original slag and the TiC in the reducing TiO2 on the foaming processes can be analyzed. The reason is determined why more times foaming phenomenon can take place in slag containing high TiO2.
Key words: foaming slag; blast furnace slag; reducing TiO2; foam caused by reduction; TiC
