(中南大學 粉末冶金國家重點實驗室，長沙 410083)
摘 要: 利用元素粉末冶金方法制備了TiAl合金排氣閥。為提高排氣門桿部的致密度、均勻度，設計了特有的徑向熱壓工藝，并從理論上分析了與該工藝相關的壓坯密度、致密化和應力變化規律。制備出高徑比為10.7，密度為3.79g/cm3的粉末冶金TiAl合金汽車發動機排氣門。
關鍵字: 粉末冶金；TiAl基合金；排氣門
TiAl-based alloy automotive
exhaust valve
（State Key Laboratory for Powder Metallurgy，
Central South University， Changsha 410083，China）
Abstract:In order to manufacture TiAl-based alloy automotive exhaust valve，a new powder densification and near net shaping technique (named as radial hot pressing) was suggested. The density of the powder compact，the densification equation and stress equation for radial hot pressing have been determined theoretically. By this technique，TiAl-based alloy automotive valve with large height-to-diameter ratio of 10.7 has been obtained，and its density up to 3.79g/cm3，which has proven the feasibility of radial hot pressing experimentally.
Key words: powder metallurgy; TiAl-based alloy; valve
