(1.上海交通大學 金屬基復合材料國家重點實驗室，上海 200030；
2.華中理工大學 材料學院， 武漢 430074)
摘 要: 利用HST-2型消失模涂料高溫性能測試儀研究了涂料組成、 涂層厚度、透氣性、溫度等對聚苯乙烯熱解產物通過消失模涂層的傳輸特性的影響。結果表明: 增加云母粉、珠光粉加入量及涂層厚度，涂層透氣性下降，熱解產物傳輸曲線的峰值上升，傳輸時間增長。探討了模樣熱解產物通過涂層的傳輸行為對消失模鋁鑄件孔隙率的影響。研究發現，熱解產物傳輸曲線峰值高、傳輸時間長，有利于減少鋁件的孔隙率。當熱解產物傳輸曲線的峰值及傳輸時間分別達到0.412kPa和48.3s以上時，鋁鑄件的針孔率可達到一級。實驗結果表明，自制的HW-1涂料的傳輸性能可與美國Ashland涂料的相當。
關鍵字: 鋁合金；消失模鑄造；熱解產物；傳輸特性
aluminum alloy casting in
lost foam process
DING Wen-jiang1，LUO Ji-rong2
（1.State Key Laboratory of Metal Matrix Composite，
Shanghai Jiaotong University，Shanghai 200030, China;
2.School of Materials，Huazhong University of
Science and Technology，Wuhan 430074, China）
Abstract:The effects of coating constituent，coating layer thickness，permeability and temperature on transfer behaviors of decomposition products through coating layer were studied with HST-2 instrument of high temperature permeability for lost foam coating. The results show that the peak values and transfer time increase with the increase of Zhuguang powder and mica content, coating thickness and with the decrease of permeability. The relationship between casting porosity and transfer behavior of decomposition products was research ed. It is pointed out that high peak value and long transfer time are helpful for decreasing the porosity of castings. When the peak value and transfer time are more than 0.412kPa and 48.3s，the rating of porosity of aluminum casting can reach grade 1. The results show that the transfer properties of self-developed HW-1 coating are as good as those of Ashland coating in American.
Key words: aluminum alloy; lost foam casting; decomposition products; transfer property
