(1.北京科技大學 材料科學與工程學院，北京 100083;
2.鄭州工業大學 材料研究中心，鄭州 450002;
3.河南大學 潤滑與功能材料重點實驗室，開封 475001)
摘 要: 通過XRD，SEM，TEM等手段研究了Al-8Fe常規鑄態合金原位生成不同TiC粒子含量時相組成及顯微組織的變化，以及TiC同α(Al)基體及Al3Fe相之間的界面關系。結果表明：隨著TiC含量的增多，Al-8Fe合金中Al3Fe相及縮松的形貌及尺寸明顯發生了變化，TiC與α(Al)基體之間界面干凈，而與Al3Fe之間則存在一過渡層。
關鍵字: 原位反應；顯微組織；Al-8Fe合金
on microstructure of conventional
cast Al-8Fe alloy
WU Zhi-shen3,ZHANG Zhi-jun3
（1.College of Materials Science and Engineering，
University of Science and Technology Beijing，
Beijing 100083,China;
2.Research Center for Materials，Zhengzhou University of
Technology，Zhengzhou 450002,China;
3. Key Lab of Lubricant and Functional Materials，
Henan Univeristy，Kaifeng 475001,China）
Abstract:The changes of the microstructure of conventional cast Al-Fe alloys in which in-situ TiC of different contents was added were studied by XRD，SEM and TEM analyses.The interface between TiC and the matrix and the interface between TiC and Al3Fe were also studied.The results show that with the increasing content of TiC，the morphology and size of Al3Fe change first from coarse rod-like to fine acicular，then to netted phase. And the porosity become smaller and disappears finally. The interface between TiC and the matrix is clear. But at the interface between TiC and Al3Fe，is observed a transitional layer.
Key words: in-situ TiC; microstructure; Al-8Fe alloys
