(1. 武漢理工大學 材料科學與工程學院， 武漢 430070；
2. 華中科技大學 材料學院， 武漢 430074)
摘 要: 采用半固態攪熔復合及模鍛方法制備Al2O3/Al復合材料，討論了工藝參數對Al2O3顆粒在鋁合金液中的吸收性與分散性的影響，并對所得復合材料的強度、沖擊韌性和耐磨性進行了實驗。結果表明，通過選擇合適的工藝參數，可以很好地解決Al2O3顆粒在Al合金液中的分散性問題，所得復合材料具有一定韌性和良好的耐磨性能。
關鍵字: 鋁基復合材料； 顆粒增強； 攪熔復合
particulate reinforced aluminium matrix composites
（1. School of Materials Science and Engineering，
Wuhan University of Technology, Wuhan 430070, P.R.China;
2. School of Materials Science and Engineering， Huazhong University of
Science and Technology， Wuhan 430074, P.R.China）
Abstract:Al2O3/Al composites were manufactured through melt-stirred composing and die-forging in semi-solid. The effect of processing parameters on the absorbability and dispersiveness of Al2O3 particulate in aluminium liquid was investigated. The strength，impact toughness and wear resistance of the composites were also examined. Results show that the problems of the dispersiveness of Al2O3 particulate in aluminium liquid can be solved effectively by alternative processing parameters. The composites possess relative toughness and good wear resistance.
Key words: aluminium matrix composites; particulate reinforced; melt-stirring composing
