(1.北方交通大學 機電工程學院， 北京 100044；
2. 燕山大學 機械工程學院，秦皇島 066004)
摘 要: 針對非軸對稱金屬異型擠壓塑性流動及模腔研究的理論課題，借助于近代共形映射數學理論研究成果，利用法線收斂法，建立了映射函數解析方法。將三維金屬異型材擠壓塑性成形問題轉化為二維軸對稱成形問題，求解橢圓異型擠壓金屬塑性成形連續流動場和應變速度場的數學解析模型，并應用金屬塑性成形理論，建立了精密擠壓異型材優化模腔的數學模型，同時為精密快速地實現擠壓模腔的CAD/CAM一體化目標提供了技術支持。
關鍵字: 塑性成形； 擠壓； 模腔； 優化
die cavity in ellipse special-shaped extrusion
DU Feng-shan2， LIU Cai2， QIU Cheng1
（1. College of Mechanical and Electronic Engineering，
Northern Jiaotong University, Beijing 100044， P.R. China;
2. College of Mechanical Engineering， Yanshan University，
Qinhuangdao 066004， P.R. China）
Abstract: On basis of the theory of metal plastic fluid and research of die cavity on non-axis-symmetry extrusion of special-shaped products, in virtue of mathematical research results of the conformal mapping theory，by using method of normal convergence， numerical value analysis of mapping function was built. Three-dimension metal plastic deformation of special-shaped products was transformed into two-dimension axis-symmetry problem， analysis model of the continuous stream and strain rate fields were sought in metal plastic deformation of ellipse-shaped product. By metal plastic theory， the mathematical model optimized to ellipse die cavity is established in exact extrusion. The integrative goal that realizes quickly CAD/CAM of exact ellipse product die cavity is supported.
Key words: plastic deformation; extrusion; die cavity; optimization
