(中南大學 化學化工學院， 長沙 410083)
摘 要: 針對砂狀氧化鋁生產實踐，基于熱力學與動力學原理以及生產過程穩態運行等假設，推導出了砂狀氧化鋁生產過程首槽溫度控制預測的準理論模型，采用生產現場數據，包括粒度分布值φ(rc)、溫度(T )、苛性比(Rp)、苛性鈉濃度(c(NaOH))、鋁酸鈉濃度(c(NaAl(OH)4))等，應用統計回歸法求出模型參數K0，K1， K2，即可根據生產工藝條件要求計算出首槽溫度的預報值，用于指導并控制砂狀氧化鋁生產。
關鍵字: 砂狀氧化鋁； 溫度控制； 準理論模型
first trough temperature in sandy alumina production
（College of Chemistry and Chemical Engineering,
Central South University, Changsha 410083, P.R.China）
Abstract:According to the practice of sandy alumina production， a sub-theory model is deduced based on the principle of thermodynamics and kinetics and the hypothesis of the steady state process of producing. By gathering the local data of producing， including the particle distribution φ(rc)，temperature (T )， caustic ratio(Rp)， the concentration of sodium caustic and sodium aluminate (c(NaOH), c(NaAl(OH)4)) and so on，the model parameters K1, K2, K3 can be obtained using the method of statistics regression. The first trough temperature is then conveniently predicted from the model.
Key words: sandy alumina; temperature control; sub-theory model
