(哈爾濱工業大學 金屬精密熱加工國防科技重點實驗室, 哈爾濱 150001)
摘 要: 研究了TiCp/Ti復合材料中增強相TiC的形貌和缺陷。XRD和SEM分析表明，材料中的TiC以初生枝晶狀和共晶短棒狀為主，另外還存在細小塊狀TiC。材料的深腐蝕SEM觀察發現，TiC枝晶表面存在生長條紋，內部存在孔洞。生長條紋是TiC枝晶在自由生長過程中由于周圍溫度和溶質濃度梯度的波動而產生的。TiC枝晶內部存在純Ti析出物，該析出物在制樣過程中被腐蝕而留下了孔洞。
關鍵字: 復合材料; 形貌; 缺陷
in-situ TiCp/Ti composite
（National Key Laboratory for Precision Hot Processing of Metal,
Harbin Institute of Technology, Harbin 150001, P.R.China）
Abstract:The morphologies and defects of TiC in TiCp/Ti composites were studied. The analysis results of XRD and SEM indicate that TiC mainly exists in the matrix with primary dendrite and short-bar shape eutectic. In addition, fine TiC particles are found. The growth stripe and the pore are observed at the surface and in the center of TiC in the deeply etched microstructure, respectively. It is considered that the growth strip is due to the fluctuation of temperature and solute concentration gradient during the free growth process of TiC dendrite. However, Ti precipitates are found in the center of TiC and deep etching of Ti precipitates leads to the appearance of the pore in SEM microstructure.
Key words: composite; morphology; defects
