(中南大學 冶金科學與工程系， 長沙 410083)
摘 要: 在自行設計的霧化制粉裝置上，研究了限制式噴嘴的關鍵結構參數如輸液管內徑、噴嘴突出長度等，以及霧化工藝參數如壓力及液鋅的過熱度等對鋅粉粒度的影響。將所制備的鋅粉進行了篩分，對粒徑的大小和分布進行了分析。實驗發現，顆粒粒度的分布服從對數[CD*2]正態分布規律。 在一定的條件下， 輸液管內徑越大，輸液管突出長度越長，鋅粉的平均粒度dm、體積平均直徑dVm和Sauter平均直徑dVs越大，即顆粒越粗；霧化壓力越大，液鋅的過熱度越高，dm ，dVm和Sauter平均直徑dVs越小，即粉末越細。
關鍵字: 限制式噴嘴； 霧化鋅粉； 平均粒度； 體積平均直徑； Sauter平均直徑
processing parameters on particle size
of zinc powders in gas atomization
（Department of Metallurgical Science and Engineering，
Central South University， Changsha 410083, P.R.China）
Abstract: On an atomization equipment with confined type nozzle， the influence of the diameter of inner delivery tube， protrusion of nozzle， gas pressure and superheat of molten zinc on particle size of zinc powders has been studied. Zinc powders were sieved， the sizes and size distribution of zinc powders were analyzed. There is a wide range of particle sizes which approximate the log-normal distribution law. The particle mean diameters， volume mean diameters and Sauter mean diameters of powders increase with diameter of inner delivery tube and nozzle protrusion， and decreases with gas pressure and superheat of molten zinc. In other words， the particle size increases with diameter of inner delivery tube and nozzle protrusion and decrease with gas pressure and superheat of molten zinc.
Key words: confined type nozzle； atomized zinc powder； mean diameter； volume mean diameter； Sauter mean diameter
