影響的有限元分析
(東北大學 材料與冶金學院， 沈陽 110004)
摘 要: 針對單輥攪拌技術制備A2017半固態合金的工藝過程，利用ANSYS有限元分析軟件計算出了不同澆注溫度、軋輥轉速、輥-靴型腔寬度條件下合金溫度場、速度場分布，分析了單輥攪拌工藝條件對A2017合金熱/流耦合場的影響。優化了單輥攪拌制備A2017半固態材料的工藝參數，合理的澆注溫度為690～790℃，輥-靴型腔寬度為4mm，軋輥轉速為0.2m/s。
關鍵字: 工藝條件；有限元；半固態
process conditions' effects on
thermal/fluid multiple field of
A2017 alloy
（School of Materials and Metallurgy, Northeastern University,
Shenyang 110004, China）
Abstract:According to the principle of single-roll stirring process, FEM analysis by ANSYS program was adapted to calculate thermal/fluid field under different pouring temperatures, roll velocities and roll-shoe widths during manufacturing A2017 semisolid alloy by single-roll stirring process. The effects of process conditions on thermal/fluid field were analyzed. Process parameters of manufacturing semisolid A2017 alloy were optimized. Proper pouring temperature is 690～790℃, the roll-shoe gap width is 4mm and roll rotating velocity is 0.2m/s.
Key words: process conditions; FEM; semisolid
