(1. 四川大學 材料科學與工程學院， 成都 610065；
2. 中國核動力研究設計院 核燃料及材料國家重點實驗室，
成都 610041；
3. 成都飛機工業有限責任公司， 成都 610091)
摘 要: 研究了含氫量為11%(質量分?jǐn)?shù))的一種Ti-Al-Zr合金在室溫和100℃時的氫致延遲斷裂行為。結果表明該合金的裂紋擴展分兩個階段：在第1階段中，裂紋擴展速率da/dt隨著應力強度因子KⅠ的增加而稍稍增加(室溫下)或者不變(100℃時)；在第2階段da/dt隨KⅠ增加而迅速增加，當KⅠ達到KⅠH時，試樣失穩斷裂。室溫和100℃時的KⅠH分別為58MPa/m3/2和61MPa/m3/2。
關鍵字: Ti-Al-Zr合金；氫致延遲斷裂；力學性能
behavior of Ti-Al-Zr alloy
JIANG You-rong2 ，HE Xiao3
（1. School of Materials Science and Engineering,
Sichuang University, Chengdu 610065, China;
2. State Key Laboratory of Nuclear Flue and Materials,
Nuclear Power Institute of China, Chengdu 610041, China;
3. Chengdu Aerocraft Company, Chengdu 610091, China）
Abstract:Hydrogen induced delayed fracture behavior of a Ti-Al-Zr alloy containing 11%(mass fraction) hydrogen at room temperature and 100℃ was studied. The results show that the curves of crack propagation velocityvs stress intensity factor have typical two-stage characteristics. In the first stage, crack growth velocity(da/dt) does not increase significantly with stress intensity factor KⅠ. But in the second stage，(da/dt) increase rapidly with KⅠ increasing，and the specimen fractures when KⅠ extends to critical value KⅠH. KⅠH at room temperature and 100℃ is about 58MPa/m3/2 and 61MPa/m3/2 respectively.
Key words: Ti-Al-Zr alloy; hydrogen induced delayed fracture; mechanical property
