(1. 武漢科技學院 機電系， 武漢 430073；
2. 中國地質大學 工程學院， 武漢 430074；
3. 中國地質大學 材料與化學工程學院， 武漢 430074；
4. 中國地質大學 機電工程學院，武漢 430074)
摘 要: 討論了熱壓金剛石工具材料的包鑲力和致密性。建立并運用熱壓金剛石工具材料熱壓燒結后期的密度及致密化方程，分析了熱壓燒結各主要工藝參量及物理參量。對Fe，Ni，Co包鑲金剛石，以及主要粘結相663Cu，Co，復合Fe粉，復合Co粉等胎體材料進行了差熱分析實驗，驗證了該密度及致密化方程的正確性，并用于指導生產實際，使生產出的熱壓金剛石工具材料的實際使用性能及其穩定性得到了有效的提高。
關鍵字: 金剛石工具材料； 熱壓燒結； 致密化； 包鑲力
diamond tools and its densification
DUAN Long-chen2, HU Guo-rong3, SUN Li-peng4
（1. Department of Mechanical and Electrical Engineering,
Wuhan Institute of Science and Technology,Wuhan 430073, P.R.China；
2. College of Engineering, China University of
Geosciences, Wuhan 430074, P.R.China；
3. College of Material and Chemistrical Engineering,
China University of Geosicences, Wuhan 430074, P.R.China；
4. College of Mechanical and Electronic Engineering,
China University of Geosciences, Wuhan 430074, P.R.China）
Abstract:The wrapped force and the densification of the hot pressed sintered matrix composites for the diamond tools (HPSMCDT) were discussed, the density and densification equation group for the hot pressed sintered later stage of HPSMCDT were established and applied, the various technological and physical parameters with the equation group were thoroughly analyzed. The test of the differential thermal analyses (DTA) with the composites of Fe, Ni, Co wrapped up the diamonds, the principle adhensive phase as 663Cu powder, composite as Fe composites and Co composites was carried out. The correctness of the density and densification equation group established was verified. These researches were used in the actual hot pressed sintered technology for the diamond tool composites, the actual performance index and the related stability of the HPSMCDT were radically improved.
Key words: diamond tool composite; hot pressed sintered; wrapped force; densification
