(浙江工業大學 化學工程與材料學院，杭州 310032)
摘 要: 采用鈦片在氮?dú)庵?00 ℃退火的方法，在鈦片表面原位生成TiN薄膜，并以此為基體采用熱分解法制備IrO2-Ta2O5涂層鈦陽極。研究含TiN中間層IrO2-Ta2O5涂層鈦陽極及傳統IrO2-Ta2O5涂層鈦陽極的開路電位、析氧行為、循環伏安和電化學阻抗等性能。結果表明：含TiN中間層IrO2-Ta2O5涂層鈦陽極具有非連續狀裂紋結構，且表面生長出大量IrO2納米晶體，其電催化析氧性能優于傳統IrO2-Ta2O5涂層鈦陽極的電催化析氧性能；涂層燒結溫度越低，電化學性能越好；當燒結溫度低于500 ℃時，TiN中間層可以顯著延長IrO2-Ta2O5涂層鈦陽極的工作壽命。
關鍵字: TiN薄膜；IrO2-Ta2O5涂層；鈦陽極；電催化性能；熱處理
IrO2-Ta2O5/Ti coating anodes with TiN interlayer
（College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032, China）
Abstract:TiN film was prepared by heating treatment of titanium plates under N2 flow at 700 ℃, and IrO2-Ta2O5 coating was formed on the as-prepared Ti/TiN substrate by thermal decomposition method. The electrocatalytic properties of the IrO2-Ta2O5 /Ti coating anodes with and without TiN interlayer, such as the open-circuit potential, oxygen evolution, cyclic voltammetry and electrochemical impedance spectroscopy were investigated. The results show that the IrO2-Ta2O5/TiN/Ti anodes have discontinuity crack and abundant IrO2 nanocrystals on the surface, which results in better electrocatalytic properties than the normal IrO2-Ta2O5/Ti anodes. The lower the sintering temperature for coating of IrO2-Ta2O5 layer is, the better electrochemical properties the IrO2-Ta2O5/TiN/Ti anodes have. The TiN film can increase the life time of coating anodes prepared at temperature lower than 500 ℃.
Key words: TiN film; IrO2-Ta2O5; coating; Ti anodes; electrocatalytic properties; heat treatment
