(中南大學 粉末冶金國家重點實驗室, 長沙 410083)
摘 要: 在氣氛保護下采用熱壓工藝制備了具有梯度結構的Ag-Cu-MoS2電刷材料， 對該材料的制備工藝、 顯微結構、 電性能和摩擦磨損性能等進行了分析。 結果表明： 在熱壓過程中， 由于氬氣的保護作用， 雖然工藝溫度達到850 ℃， MoS2并未發生氧化反應， 保障了材料的自潤滑性能； 所用工藝較好地實現了梯度結構的構造及材料的制備， MoS2均勻而彌散地分布于Ag-Cu基體中， 該材料具有優良的電性能、 摩擦磨損性能及焊接性能。
關鍵字: Ag-Cu-MoS2電刷材料； 顯微結構； 導電性； 摩擦磨損
（ State Key Laboratory of Powder Metallurgy, Central South University,
Changsha 410083, China）
Abstract: Ag-Cu-MoS2 brush materials with a graded structure was produced by hot press process in protective atmosphere. The processing, microstructure, conductivity and wear properties of Ag-Cu-MoS2 brush materials were studied. The results show that MoS2 is not oxidized in the process, and Ar2 has protection effect. The materials and the graded structure can be constructed by proper process-control, and MoS2 is distributed homogeneously in the Ag-Cu matrix. The Ag-Cu -MoS2 brush materials have good conductivity, wear properties and welding performance.
Key words: Ag-Cu-MoS2 brush materials; microstructure; conductivity; wear
