(江蘇大學 材料科學與工程學院，鎮江 212013)
摘 要: 利用形狀記憶合金的本構關系， 分析了在自由應力狀態下的殘余應變與溫度的關系。 使用動態數據采集分析儀， 測試了安裝CuZnAl形狀記憶合金耗能器的框架結構的減振性能； 應用電子萬能拉伸試驗機測試了CuZnAl形狀記憶合金的應力—應變滯回曲線， 借助透射電子顯微鏡， 分析了CuZnAl形狀記憶合金在熱機械循環過程中顯微組織的變化； 比較了不同熱處理工藝對CuZnAl形狀記憶合金熱機械循環后的滯回曲線面積及減振性能的影響。 結果表明： CuZnAl形狀記憶合金用于框架結構具有較好的減振效果， 可明顯降低框架結構的振動頻率， 其中馬氏體CuZnAl形狀記憶合金耗能器具有較大的耗能能力， 經室溫水淬時效7 h處理后減振效果最好。
關鍵字: CuZnAl形狀記憶合金; 本構關系; 框架減振; 滯回曲線; 熱機械循環
WANG Xiao-dong, SHI Qiang-jun
（ School of Materials Science and Engineering,
Jiangsu University, Zhenjiang 212013, China）
Abstract: The relationship between the residual strain and the temperature under free stress condition is analyzed by using constitutive relation of SMA. The damping performance of the frame with CuZnAl SMA dampers is tested by dynamic data collecting analysis meter. Then the stress—strain curve of CuZnAl SMA is measured by electronic universal testing machine. The change of microstructure during thermo-mechanical cycle is analyzed by transmission electron microscope. The effects of different heat-treatment processes on the area of hysteretic loop and the damping capability of CuZnAl SMA after thermo-mechanical cycles are studied. Experimental results show that CuZnAl SMA has good damping capability in frame structure and can obviously reduce the vibration frequency. CuZnAl SMA in martensitic state has better damping ability, and the damping effect of the alloy after being quenched into water and aged for 7h is the best.
Key words: CuZnAl shape memory alloy; constitutive relation; structure damping; hysteretic loop; thermo-mechanical cycle
