( 1. 清華大學 機械工程系， 北京 100084;
2. 西北工業大學 凝固技術國家重點實驗室， 西安 710072)
摘 要: 研究了具有枝晶組織的Al-5.8%Cu合金在控制熔化過程中固相形態的演變， 以及加熱速率、保溫時間對固相形態演變的影響。 分析了影響熔化組織中固相形態的因素， 提出由枝晶組織直接獲得適合半固態成形的球晶組織的控制熔化工藝， 并制備了固相顆粒圓整、 尺寸較小、分布均勻的半固態漿料。
關鍵字: 控制熔化；半固態； 組織演變
semi-solid slurry by controlled melting
（ 1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;
2. State Key Laboratory of Solidification Process,
Northwestern Polytechnical University, Xi'an 710072, China）
Abstract: The microstructure evolution of a dendritic Al-5.8%Cu alloy during controlled heating and re-melting process was investigated. Attention has been paid to the effects of heating rate and holding time on the morphology changing of solid grains during re-melting. Based on the analysis of the factors influencing morphology of the melting grains, a new method to prepare semi-solid slurry by controlling as-cast microstructure and melting process was proposed. And a semi-solid slurry was successfully obtained by using the new method.
Key words: controlled melting; semi-solid; microstructure evolution
