(中南大學 材料科學與工程學院， 長沙 410083)
摘 要: 通過慢應變速率拉伸測試、 掃描電鏡及透射電鏡分析等研究了2519鋁合金在T6、 T8熱處理狀態下， 在空氣和3.5%(質量分?jǐn)?shù))的NaCl溶液中的應力腐蝕開裂（SCC）行為，研究了應變速率對2519鋁合金SCC行為的影響。 結果表明： 同一熱處理狀態下， 2519鋁合金在3.5%的NaCl溶液中應力腐蝕開裂敏感性高于干燥空氣中；在應變速率為1.33×10-5 s-1時，其SCC敏感性比應變速率為6.66×10-5 s-1時的敏感性大； 同一應變速率下， T6狀態比T8狀態SCC敏感性大， T8狀態時抗應力腐蝕性能比T6狀態時好。
關鍵字: 2519鋁合金； 熱處理； 慢應變速率拉伸； 應力腐蝕敏感性
LIANG Xiao-peng, LI Zhou, JIA Yu-zhen
（School of Materials Science and Engineering,
Central South University, Changsha 410083, China）
Abstract: The stress corrosion cracking（SCC）performance of aluminum alloy 2519 in air and in 3.5% NaCl solution was investigated by using slow strain rate tension, scanning electron microscope and transmission electron microscope. The experimental results show that aluminum alloy 2519 is more susceptible to SCC in 3.5% NaCl solution than in air and the alloy is more susceptible to SCC at 1.33×10-5 s-1 than at 6.66×10-5 s-1 at the same temper. Alloy 2519-T6 is more susceptible to SCC than 2519-T8 at the same strain rate.
Key words: aluminum alloy 2519; heat treatment; slow strain rate tension; stress corrosion cracking susceptibility
