( 1. 東北大學 材料與冶金學院， 沈陽 110004；
2. 遼寧工學院 材料與化學工程學院， 錦州 121001)
摘 要: 采用取向分布函數法研究了冷軋6111鋁合金板的再結晶織構。 結果表明：冷軋6111鋁合金薄板的再結晶織構主要由兩種織構組分構成， 一種是繞板法向旋轉約15°的立方織構組分Cube＋ND15，另一種是{110}〈111〉織構組分； 該兩種再結晶織構組分與主要形變織構組分均具有〈111〉型取向關系， 其中Cube＋ND15組分與形變織構中的S組分間具有近似的40°〈111〉取向關系， {110}〈111〉組分與形變織構中的Copper組分間具有33°〈111〉取向關系； 在退火保溫過程中， 再結晶織構的取向密度首先達到最大值，然后略有降低， 經一定時間后基本不再變化。
關鍵字: 鋁合金； 再結晶； 織構； 固溶處理
Al alloy 6111 after solution treatment
（ 1. School of Materials and Metallurgy,
Northeastern University, Shenyang 110004, China;
2. College of Material and Chemical Engineering,
Liaoning Institute of Technology, Jinzhou 121001, China）
Abstract: The recrystallization textures of Al alloy 6111 were investigated by means of orientation distribution function (ODF). The results show that the recrystallization textures in cool rolled Al alloy 6111 are composed of the cube orientation rotated about 15° around normal direction (i.e. Cube+ND15)and the orientation {110}〈111〉. The recrystallization texture components can be derived by a rotation of the main rolling texture components. There is an approximate 40°〈111〉 orientation relationship between Cube+ND15 and S orientation, and a 33°〈111〉 orientation relationship between orientation {110}〈111〉 and Copper orientation. During holding temperature of solution treatment, the orientation densities of the recrystallization texture components firstly increase and maximize and then reduce slightly, but keep constant when holding time is beyond 10 min.
Key words: Al alloy； recrystallization； texture; solution treatment
