中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 No. 2 February 2012 |
（1. Luoyang Ship Material Research Institute, Luoyang 471003, China;
2. State Key Laboratory of Nonferrous Metals and Processes, General Research Institute for Nonferrous Metals,
Beijing 100088, China）
Abstract:The effect of quenching rate on the electrical conductivity and microstructure of thick plates of incumbent AA7050 was investigated by employing Jominy end quench test. The electrical conductivity measurement and microstructural observation were conducted at different distances from the quenched end. The results indicate that the average cooling rates decrease with increasing the distance from the quenched end of the bar in the quench sensitive temperature range. However, the electrical conductivity increases with the increase of distance from the quenched end. The surface parts of the plate were fully recrystallized, while partial recrystallization took place at the quarter and center parts of the plate. The quench induced grain boundary precipitates became remarkably coarser and discontinuously distributed with increasing distance from the quenched end of the bar. Plenty of heterogeneous precipitates were observed to nucleate on Al3Zr dispersoids when the distance from the quenched end was greater than 38 mm.
Key words: Jominy end quench test; quench sensitivity; cooling rate; quench induced precipitates
