中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 No. 2 February 2012 |
high-pressure die-cast Mg−Al−Ce−Y-based alloy
（1. Key Laboratory of Superlight Materials & Surface Technology of Ministry of Education,
Harbin Engineering University, Harbin 150001, China;
2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
3. State Key Laboratory of Rare Earth Resources Utilization, Changchun Institute of Applied Chemistry,
Chinese Academy of Sciences, Changchun 130022, China）
Abstract:With the aim to further improve the mechanical properties of Mg−Al−RE-based alloy, Mg−3.0Al−1.8Ce−0.3Y−0.2Mn alloy was prepared by high-pressure die-casting technique. The microstructure, thermal stability of intermetallic phases and mechanical properties were investigated. The results show that the alloy is composed of fine primary α-Mg dendrites and eutectic in the interdendritic regions. The intermetallic phases in eutectic are Al11(Ce,Y)3 and Al2(Ce,Y) with the former being the dominant one. The thermal stability of Al11(Ce,Y)3 is conditioned. It is basically stable at temperature up to 200 °C within 800 h, while most of the Al11(Ce,Y)3 intermetallics transform to Al2(Ce,Y) at higher temperature of 450 °C for 800 h. The alloy exhibits remarkably improved strength both at room temperature and 200 °C, which is mainly attributed to the reinforcement of dendrite boundaries with Al11(Ce,Y)3 intermetallics, small dendritic arm spacing effect as well as the solid solution strengthening with Y element.
Key words: magnesium alloy; Mg−Al−Ce−Y alloy; Al11RE3; structure stability; mechanical properties
