中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 Special 2 August 2011 |
（1. Institute for Advanced Ceramics, School of Materials Science and Engineering,
Harbin Institute of Technology, Harbin 150001, China;
2. Advanced Composites Centre for Innovation and Science (ACCIS), Department of Aerospace Engineering,
Faculty of Engineering, University of Bristol, Queens Building, University Walk, Bristol BS8 1TR, UK）
Abstract:The fully dense boron carbide matrix composites containing 10%−40% (volume fraction) TiB2(TiB2/B4C) were in-situ fabricated via chemical reaction of B4C, TiO2 and graphite powders at 2 050 °C under a pressure of 35 MPa. Scanning electron microscopy (SEM) and transmission election microscopy (TEM) observations show that the sub-micron/nano-sized TiB2 particles are uniformly located within the matrix grains and at the B4C grain boundaries. With the increase of TiB2 content, the elastic modulus and fracture toughness of composites increase remarkably. However, the situation is reversed for Vickers hardness and flexural strength. The fracture toughness exhibits a maximum value of 8.2 MPa×m1/2 for the 40% (volume fraction) TiB2/B4C composite. The main toughening mechanisms of TiB2/B4C composites are microcrack toughening and crack deflection toughening.
Key words: TiB2/B4C composites; in-situ reaction; toughening mechanisms
