中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 1 January 2011 |
wires produced by continuous casting
（1. Department of Applied Physics, Northwestern Polytechnical University, Xi’an 710072, China;
2. School of Materials Science and Chemical Engineering, Xi’an Technological University, Xi’an 710032, China;
3. Baoji Titanium Industry Co., Ltd., Baoji 721014, China;
4. School of Materials Science and Engineering, Xi’an Jiaotong University, Xi’an 710049, China）
Abstract:The texture evolution of cold drawing copper wires produced by continuous casting was measured by X-ray diffractometry and electron back-scatter diffractometry, and was simulated using Taylor model. The results show that in the drawn poly-crystal copper wires produced by traditional continuous casting, á111ñ and á100ñ duplex fiber texture forms, and with increasing strain, the intensities of á111ñ and á100ñ increase. In the drawn single-crystal copper wires produced by Ohno continuous casting, á100ñ rotates to á111ñ, and there is inhomogeneous distribution of fiber texture along radial direction of the wires, which is caused by the distribution of shear deformation. Compared with á100ñ, á111ñ fiber texture is more stable in the drawn copper wires. Comparison of the experimental results with the simulated results shows that the simulation by Taylor model can analyze the texture evolution of drawn copper wires.
Key words: cold drawing; copper wires; texture; Taylor model
