中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 20 No. 12 December 2010 |
colony alpha microstructure
LI Xin (李 鑫)1, OUYANG De-lai (歐陽德來)1
（1. National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology,
Nanchang Hangkong University, Nanchang 330063, China;
2. College of Materials Science and Technology, Nanjing University of
Aeronautics and Astronautics, Nanjing 210016, China）
Abstract:The initiation sites and influencing factors of cavity nucleation were investigated for a Ti-6Al-2Zr-1Mo-1V alloy with lamellar starting structure, using the isothermal hot compression test. All samples were deformed to a true strain of 0.70 in the temperature range of 750−950 °C and strain rate range of 0.001−10 s−1. The corresponding microstructures were observed by means of the metallurgical microscopy and scanning electron microscopy (SEM). It was found that all cavities occurred at the bulge regions of the compression specimens. Most of cavities nucleated along prior beta boundaries oriented 45° to the compression axis, while others nucleated at the interfaces of lamellar alpha colonies. Cavity nucleation was inhibited with increasing the volume fraction of beta phase and the volume fraction spheroidized of lamellar alpha phase.
Key words: Ti-6Al-2Zr-1Mo-1V alloy; cavity nucleation; lamellar alpha colony; dynamic spheroidization
