中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 20 Special 3 September 2010 |
（1. School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China;
2. State Key Laboratory of Material Processing and Die & Mould Technology,
Huazhong University of Science and Technology, Wuhan 430074, China）
Abstract:The microstructure and mechanical properties of the rheo-diecasting (RDC) A390 alloy under as-cast and T6 heat treatment conditions were investigated. The results indicate that the RDC sample has fine and uniform microstructure throughout the sample under the as-cast condition, and the average size of primary Si spheroids is 20-30 µm. Meanwhile, the intermetallic compounds in RDC sample are reduced. Compared with the alloy produced by conventional liquid die-casting(LDC), RDC samples have improved tensile strength, ductility, hardness and wear resistance. It is also found that heat-treatment of the RDC A390 alloy under T6 condition, can substantially improve mechanical properties, with the tensile elongation more than 100% improvement.
Key words: A390 alloy; rheo-diecasting; ultrasonic vibration; microstructures; mechanical properties
