Abstract:In the die industry, it is commonly agreed that residual tool life can be successfully extended by timely repair of damaged surfaces. Traditionally, the main repair process is tungsten inert gas (TIG) welding, but a new process called direct laser metal tooling (DLMT) emerges. DLMT is a manual process, of which results depend on the materials of the powders and tools, the laser process and parameters. This technology is a direct-metal freeform fabrication technique in which a 200 W fiber laser is used. AISI H13 tool steel is a suitable material for die casting tools because of the high resistance to thermal fatigue and dimensional stability. In this research, AISI H13 tool steel was melted with metal powder by fiber laser. Before melting AISI H13, the powders were analyzed with XRF equipment. Then, hardness distribution of laser melted zone was investigated. The microstructure in laser melted zone was discussed. In order to identify the effect of particle size of powder on the melted zone, two types of particle sizes of powders were used. Experimental results show that the mold repair process using DLMT can be applied in the mold repair industry.

Key words: direct laser metal tooling; fiber laser; AISI H13 steel